Other options would be to get a new laptop drive and swap it in to do the dos install and then maybe put it in an external enclosure. Including the bootsector etc, so that it will be bootable? It seems to me that since they’re both USB devices then if you can install dos on a flash drive you can use the same method to install it on the external hard drive. I found out that there is something called a boot sector that has to be present. So then I tried to figure out what made a drive bootable or not. This is my first time posting anything; therefore, sorry if i posted in the incorrect place, if have please guide me to the correct space.
|Date Added:||15 January 2007|
|File Size:||52.5 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Anyways, just let me know what you think, looking to hear more advice from you. These utilities still use DOS to ensure 6.22 have low-level access to the hardware without any other programs interfering or Windows getting in the way.
MS-DOS 6.22 from usb to HDD
Or am I wasting my time. It should boot OK but I’m not sure about reading and writing to the drive after that. This helps ensure BIOS updates and other low-level operations work properly. You may have to do some experimenting. Then you can put the original XP drive back 6.2. All of these ways I have been unsuccessful in doing, however, this could be due to my inexperience with these programs and DOS.
Sign up using Facebook. Net and its accuracy. It seems to me that since they’re both USB devices then if you can install dos on a flash drive you can use the same method to install it on the external hard drive. To install bootsector from file “bootsect.
At least in some cases, booting from the floppy image requires features implemented in BIOS. I think you can assume any cloning software will work with an old IDE drive. There’s some info here: First, download Rufus and launch it.
How to Create a MS-DOS bootable USB flash drive
However, your suggestion seems genius. I’d really appreciate the clarifications, thanks. Hashim 3, 6 30 For all I know I did it wrong and all of these ways are possible options when done correctly.
Also if you did find a desktop to install dos on you could remove its drive after the install and put it in an external case and set it up as above. I bought QuickBasic 4. The Best Tech Newsletter Anywhere Joinsubscribers and get a daily digest of news, geek trivia, and our feature articles.
And I am okay with wasted space. Ah yes and this is also because I only have laptops and can’t easily get to the HDD inside of it.
How to Create a Bootable DOS USB Drive
I wouldn’t put on an older dos version Under normal circumstances a cloned drive will work exactly the same as the original–it will boot and run the software the same. I’ve never tried it that way.
I assume you have the 6. It’s going to be hard to do the original dos install on anything but an internal IDE connection.
Other options would be to get md new laptop drive and swap it in to do the dos install and then maybe put it in an external enclosure.
HDDGURU: USBASPI V MS-DOS Driver
I’ve usn the following versions of Rufus from this link: Let me know if it works for you. From the main Rufus pageI’ve tested versions:.
Lastly, in my most recent findings, there the IO. There is more than one way to make a bootable USB stick, and one of those ways involves treating it like a “superfloppy” rather than as a hard drive.
The FreeDOS developers indicate that they are unwilling to address this incompatibility. Akeo 2, 1 11